BDRMV - COSMOLUBE 615

  • MSDS: BDRMV
  • Manufacturer: E F HOUGHTON AND CO
  • Product Name: COSMOLUBE 615
  • National Stock Number: 9150-00-269-8255
Product Identification

Product ID:COSMOLUBE 615
MSDS Date:09/14/1995
FSC:9150
NIIN:00-269-8255
MSDS Number: BDRMV

Responsible Party
E F HOUGHTON & CO
MADISON AND VAN BUREN AVE
VALLEY FORGE, PA 19482
US

Emergency Phone: 215-666-4105

Info Phone: 215-666-4105

Preparer: ROBERT E. WILLIAMS

Cage: 73227

Contractor
HOUGHTON INTERNATIONAL INC
930 VALLEY FORGE, PA 19482-0930 US

Telephone: 610-666-4105

Cage: 73277

Ingredients

DIPHENYLAMINE

CAS: 122-39-4

RTECS: JJ7800000

Fraction By Weight: <1.0%

OSHA PEL 10 MG/M3

ACGIH TLV: 10 MG/M3; 9192


PETROLEUM LUBRICATING GREASE

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: NORMAL APPLICATION
OF PRODUCT AS A GREASE OR LUBRICANT SHOULD NOT CREATE INHALATION
EFFECTS OR HAZARD. SKIN: MAY BE A MILD IRRITANT TO SENSITIVE SKIN
ON PROLONGED CONTACT. EYES: MIL D IRRITANT. INGESTION: NO
SIGNIFICANT EFFECTS KNOWN. CHRONIC: UNKNOWN FOR THIS PRODUCT.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:INHALATION: NOT APPLICABLE. SKIN: WASH WITH SOAP AND WATER.
EYES: FLUSH WITH WATER FOR 15 MINUTES. CONSULT PHYSICIAN.
INGESTION: CONSULT PHYSICIAN. PRODUCT CONTAINS MOSTLY SILICONE
COMPOUND.

Fire Fighting

Flash Point Method:COC
Flash Point:>400F,>204C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:NONE.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:SHOVEL INTO A CLEAN CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT WITH STRONG OXIDIZERS.
Other Precautions:POTENTIAL AS A POLLUTANT: NOT CONSIDERED A POLLUTANT.
EFFECTIVE WASTE DISPOSAL METHODS SHOULD BE UTILIZED.

Exposure Controls

Respiratory Protection:NOT REQUIRED.
Ventilation:GENERAL MECHANICAL TYPE VENTILATION IS SATISFACTORY.
Protective Gloves:IMPERVIOUS OR RUBBER.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NOT REQUIRED.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:V6
Vapor Pres:NIL
Spec Gravity:0.927
Solubility in Water:INSOLUBLE
Appearance and Odor:PINKISH-GRAY GREASE; BLAND ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL; OXIDES OF CARBON

Disposal

Waste Disposal Methods:FOLLOW REGULATIONS FOR DISPOSAL OF LUBRICATING
GREASES. MAY BE INCINERATED UNDER CONTROLLED CONDITIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.